VRaptor SpeedWorks "You Dream It, We Build It!"

E-Brake Bracket Kit

May 14, 2012  by Shane

These brackets allow you to solidly mount your emergency brake cables to your engine with the added benefit of “lengthening” the cables so that they can properly reach the hubs without ending up kinked or stretched.  The Kit consists of a Front Mounting bracket that mounts the front/main e-brake cable to the front of the engine, a Rear Mounting bracket that mounts the two rear e-brake cables to the rear of the engine, and two Connecting Links that make the connection between the factory Corvette cable end that is attached to the main cable, and the two cables that run to the hubs.  The brackets are installed using the existing oil pan bolts.  No other hardware is necessary.  All brackets are shipped as bare steel and will require paint.

Please note that this kit will only work with LS engines using a “conventional” oil pan, which (in my experience) is what is installed on most “crate” LS engines.  It will not fit with the Corvette “bat-wing” oil pan or LS7 engine where the oil lines for the dry sump are in the way.  Also will not work with the Mendeola transaxle or any transaxle where the stock GM starter is used in the stock location.